MC74VHCT373ADTRG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 5.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHCT373ADTRG Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device has 20 terminations. It belongs to 74VHCT373 family. In order to operate it, the supply voltage must be 5V. 20 pins are provided. AHCT/VHCT is the family name of this electronic device. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. It operates from 5V power supplies. There are electronic circuits attached to the 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. High efficiency requires a supply voltage of 5V. There are 3 output lines that correspond to the binary equivalents of the input line.
MC74VHCT373ADTRG Features
20-TSSOP (0.173, 4.40mm Width) package
74VHCT series
8 Bits
74VHCT373 family
20 pin count
20 pins
5V power supplies
MC74VHCT373ADTRG Applications
There are a lot of ON Semiconductor MC74VHCT373ADTRG Latches applications.
- Multistage ripple counting
- Shift register
- Ring counter
- Hammer Device Information
- Pattern Generators
- TV Set-top Boxes
- Motor Drives
- Parallel Input
- Decade counting 7-segment decimal display
- Shift Registers