MC74VHCT373ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 5.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHCT373ADTR2 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. The voltage supply is 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. In the 74VHCT series, this FPGA is located. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. It is a member of the 74VHCT373 family. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the AHCT/VHCT family of electronic devices. In addition, it is designed with a pin number of 20. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. The device is powered by 5V power supplies. There should be a voltage supply (Vsup) greater than 4.5V. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. 8 circuits enable it to achieve high performance.
MC74VHCT373ADTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
74VHCT series
8 Bits
74VHCT373 family
20 pin count
20 pins
5V power supplies
MC74VHCT373ADTR2 Applications
There are a lot of ON Semiconductor MC74VHCT373ADTR2 Latches applications.
- Buffer register
- A/D and D/A conversion
- Relay
- Shift left with parallel loading
- Up-Down Johnson
- Display
- Clocks
- Multistage ripple counting
- Double bus register system
- Parallel Output