MC74VHC74DTG
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC74DTG Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. Package Tubeembeds it. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~5.5Vis required for its operation. Temperature is set to -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. You should not exceed 115MHzin its output frequency. It consumes 2μA of quiescent There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74VHC74 family. It is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In terms of electronic devices, this device belongs to the AHC/VHCfamily of devices. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. The JK flip flop is with 1 output lines to operate. The number of channels is growing strong/weak: 2.
MC74VHC74DTG Features
Tube package
74VHC series
14 pins
MC74VHC74DTG Applications
There are a lot of ON Semiconductor MC74VHC74DTG Flip Flops applications.
- Set-reset capability
- ESD performance
- Communications
- Digital electronics systems
- Storage registers
- Individual Asynchronous Resets
- Test & Measurement
- Bus hold
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays