MC74VHC74DR2G
| Parameters | |
|---|---|
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 44 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
MC74VHC74DR2G Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 2V~5.5V is required for operation. In this case, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. This D flip flop should not have a frequency greater than 115MHz. A total of 14terminations have been recorded. The object belongs to the 74VHC74 family. The power supply voltage is 3.3V. This T flip flop has a capacitance of 4pF farads at the input. Devices in the AHC/VHCfamily are electronic devices. Electronic part Surface Mountis mounted in the way. This board is designed with 14pins on it. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Despite external influences, it consumes 2μAof quiescent current. A total of 2 channels are available.
MC74VHC74DR2G Features
Tape & Reel (TR) package
74VHC series
14 pins
MC74VHC74DR2G Applications
There are a lot of ON Semiconductor MC74VHC74DR2G Flip Flops applications.
- Power down protection
- ESCC
- Load Control
- Clock pulse
- Computing
- Counters
- EMI reduction circuitry
- Latch
- Data Synchronizers
- Storage Registers