MC74VHC574DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 115MHz |
| Family | AHC/VHC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74VHC574DT Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tube. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74VHCseries of FPGAs. It should not exceed 115MHzin terms of its output frequency. In total, it contains 1 elements. This process consumes 4μA quiescents. 20terminations have occurred. A voltage of 3.3V is used to power it. There is 4pF input capacitance for this T flip flop. It is a member of the AHC/VHCfamily of D flip flop. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 2V for normal operation. The D flip flop has no ports embedded.
MC74VHC574DT Features
Tube package
74VHC series
MC74VHC574DT Applications
There are a lot of Rochester Electronics, LLC MC74VHC574DT Flip Flops applications.
- ESCC
- Data transfer
- CMOS Process
- Storage registers
- Count Modes
- Frequency Dividers
- Supports Live Insertion
- Load Control
- Reduced system switching noise
- Shift registers