MC74VHC4066MG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 85Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74VHC4066 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~12V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74VHC4066MG Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). High reliability is provided by advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. Based on SPST - NO switching circuits, these analog multiplexers work. Look for analog switch ic variants by searching with MC74VHC4066. A 85Ohm internal resistance characterizes this multiplexer. For details about the functions of 14 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 40μA current. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source. A 4 input needs to be operated. This switch operates within the bandwidth of 160MHz.
MC74VHC4066MG Features
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74VHC4066MG Applications
There are a lot of ON Semiconductor MC74VHC4066MG Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Intelligent PBX
- Battery-powered systems
- Relay Replacement
- Power routing
- PDH Multiplexers
- Fiber In The Loop (FITL)
- High reliability control systems
- CSU
- Communications systems