MC74VHC4066DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 85Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74VHC4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC4066DR2 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -55°C~125°C TA are extended for operation. In total, 14 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. This electrical component is included in the 14 series of products. A SPST - NO switching circuit is used for these analog switches. A 4 circuit is present in this switch device. Use MC74VHC4066 to search for variants of the digital switches. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A cost-effective Single supply type analogue multiplexer. For this digital switch to work, 40μA current would suffice. Using only a single voltage supply, this analog switch requires 2V~12V voltage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electronic component can function from 12V. In 160MHz-bandwidths, data can be transferred.
MC74VHC4066DR2 Features
4 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74VHC4066DR2 Applications
There are a lot of ON Semiconductor MC74VHC4066DR2 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- USB 1.1 signal switching circuits
- MP3 players
- Data switching
- Battery Powered Instruments
- Microprocessor Controlled Analog Systems
- FTTH
- Audio and video signal routing
- Low-Voltage
- Imaging