MC74VHC373DWR2G
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74VHC |
MC74VHC373DWR2G Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A package of Tape & Reel (TR) has been used. Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5V is used as the supply voltage for this device. There is -40°C~85°C operating temperature. The 74VHC series contains FPGAs of this type. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. It is a member of the 74VHC373 family. The supply voltage of the device is 3.3V. There are 20 pins on it. It is a member of the AHC/VHC family of electronic devices. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. This part is included in FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. The device is powered by 2/5.5V power supplies. A supply voltage (Vsup) greater than 2V is required. This device is well suited for TAPE AND REEL based on its reliable performance. A binary equivalent of the input line is generated by the 3 output lines. Aquiescent current is consumed by 4μA without being affected by external forces. The circuit's superior flexibility is achieved through the use of 8 circuits.
MC74VHC373DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74VHC series
8 Bits
74VHC373 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC373DWR2G Applications
There are a lot of ON Semiconductor MC74VHC373DWR2G Latches applications.
- Display driver
- Ring counter
- BCD counting
- Multi-line decoders
- General-Purpose Register
- Motor Drives
- Decade counting
- Shift right with parallel loading
- Data acquisition
- Parallel Output