MC74LVXT4051DTRG
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVXT4051DTRG Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this switch device. Search with MC74LVXT4051 if you are looking for analog multiplexer variants. A 55Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Dual supply type digital switch with a low cost. 2.5V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 40μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. For dual power supplies, a voltage of at least 1.25V should be attached. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 80MHz bandwidths.
MC74LVXT4051DTRG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051DTRG Applications
There are a lot of ON Semiconductor MC74LVXT4051DTRG Analog Switches & Multiplexers ICs applications.
- Medical systems
- SONET/SDH ADM
- FTTH
- PDH Multiplexers
- ATM
- Data switching
- T1/E1 Terminals
- Microwave transmission systems
- DVD-R
- Residential Gateways, Home Gateway/Router