MC74LCX74MEL
| Parameters | |
|---|---|
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX74 |
MC74LCX74MEL Overview
It is embeded in 14-SOIC (0.209, 5.30mm Width) case. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. A total of 2elements are present in it. As a result, it consumes 10μA quiescent current and is not affected by external forces. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LCX74 family. An input voltage of 2.5Vpowers the D latch. The input capacitance of this JK flip flopis 7pF farads. This D flip flop belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 1bits. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A power supply of 3.3Vis required to operate it. It has 1lines.
MC74LCX74MEL Features
Tape & Reel (TR) package
74LCX series
14 pins
1 Bits
3.3V power supplies
MC74LCX74MEL Applications
There are a lot of ON Semiconductor MC74LCX74MEL Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Count Modes
- Buffered Clock
- EMI reduction circuitry
- Dynamic threshold performance
- Event Detectors
- Common Clocks
- ATE
- Single Up Count-Control Line
- Synchronous counter