MC74LCX74DTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 150MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Propagation Delay (tpd) | 8.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74LCX74DTR2 Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. The output it is configured with uses Differential. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 2V~3.6V is required for operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. You should not exceed 150MHzin the output frequency of the device. In total, it contains 2 elements. T flip flop consumes 10μA quiescent energy. Terminations are 14. A voltage of 2.5V is used as the power supply for this D latch. JK flip flop input capacitance is 7pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. There is a 3.6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V.
MC74LCX74DTR2 Features
Tape & Reel (TR) package
74LCX series
MC74LCX74DTR2 Applications
There are a lot of Rochester Electronics, LLC MC74LCX74DTR2 Flip Flops applications.
- Data Synchronizers
- Circuit Design
- Parallel data storage
- Latch-up performance
- Computing
- Patented noise
- Data transfer
- Load Control
- ESCC
- Event Detectors