MC74LCX573DTR2G
| Parameters | |
|---|---|
| Max I(ol) | 0.024 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
MC74LCX573DTR2G Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 2V~3.6V is used as the supply voltage for this device. During operation, the temperature is set at -55°C~125°C. The 74LCX series contains FPGAs of this type. It is designed with 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LCX573 family. The device works with a voltage of 2.5V for its supply voltage. With 20 pins, it is equipped. LVC/LCX/Z is the family of this electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. Ensure that the supply voltage (Vsup) is greater than 2V. Electronic circuits comprise 3 input lines. Its reliable performance makes it an excellent choice for TAPE AND REEL. It consumes 10μA of quiescent current without being affected by outside factors.
MC74LCX573DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74LCX series
8 Bits
74LCX573 family
20 pin count
20 pins
MC74LCX573DTR2G Applications
There are a lot of ON Semiconductor MC74LCX573DTR2G Latches applications.
- Parallel-to-Serial Data Conversion
- Avionics
- Pattern Generators
- Stacked or Push-Down Registers
- Display
- Shift register
- Shift right register
- Frequency
- Relay
- Data acquisition