MC74LCX374DWR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Propagation Delay (tpd) | 9.5 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74LCX374DWR2 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74LCX series. This D flip flop should not have a frequency greater than 150MHz. A total of 1 elements are present. It consumes 10μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 3.3V. This JK flip flop has a 7pFfarad input capacitance. LVC/LCX/Zis the family of this D flip flop. Vsup reaches 3.6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. The D flip flop is embedded with 2ports.
MC74LCX374DWR2 Features
Tape & Reel (TR) package
74LCX series
MC74LCX374DWR2 Applications
There are a lot of Rochester Electronics, LLC MC74LCX374DWR2 Flip Flops applications.
- Set-reset capability
- CMOS Process
- Buffer registers
- Dynamic threshold performance
- High Performance Logic for test systems
- Latch
- Bus hold
- Parallel data storage
- Clock pulse
- Shift registers