MC74HCT74ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 30MHz |
| Propagation Delay | 24 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 24 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT74ADR2G Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Differential. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. A frequency of 30MHzshould be the maximum output frequency. A total of 14terminations have been recorded. You can search similar parts based on 74HCT74. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HCTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on 5V volts. High efficiency requires the supply voltage to be maintained at 5V. There are 1 output lines in this JK flip flop. There is a consumption of 2μAof quiescent current from it. 2is the number of channels.
MC74HCT74ADR2G Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
MC74HCT74ADR2G Applications
There are a lot of ON Semiconductor MC74HCT74ADR2G Flip Flops applications.
- Data transfer
- ESD protection
- Dynamic threshold performance
- Data storage
- Data Synchronizers
- Common Clocks
- Frequency division
- Automotive
- Pattern generators
- Synchronous counter