MC74HCT374ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 31 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 31 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 31ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT374ADTR2G Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HCT series. In order for it to function properly, its output frequency should not exceed 30MHz. In total, there are 1 elements. There are 20 terminations,JK flip flop belongs to 74HCT374 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 10pF farads. Devices in the HCTfamily are electronic devices. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. There are 2 ports embedded in the flip flops. In order to achieve high efficiency, the supply voltage should be maintained at 5V. There are 3 output lines in this JK flip flop. It consumes a total of 4μA quiescent current at any given time. Currently, there are 8 channels available.
MC74HCT374ADTR2G Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374ADTR2G Applications
There are a lot of ON Semiconductor MC74HCT374ADTR2G Flip Flops applications.
- Buffered Clock
- Memory
- Storage registers
- Frequency Divider circuits
- Single Down Count-Control Line
- Power down protection
- Data storage
- Clock pulse
- Computing
- Counters