MC74HCT273AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT273 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HCT273AN Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). It is included in the package Tube. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -55°C~125°C TA. D-Typedescribes this flip flop. The FPGA belongs to the 74HCT series. Its output frequency should not exceed 30MHz Hz. A total of 1 elements are present. It consumes 4μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74HCT273family make up this object. It is powered from a supply voltage of 5V. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Through Holeis mounted in the way. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. Using 8 circuits, it is highly flexible. As a result of its reliability, this D flip flop is ideally suited for RAIL. In order for the device to operate, it requires 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 4mA.
MC74HCT273AN Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273AN Applications
There are a lot of ON Semiconductor MC74HCT273AN Flip Flops applications.
- Frequency Divider circuits
- Synchronous counter
- Control circuits
- Buffered Clock
- Reduced system switching noise
- Data Synchronizers
- High Performance Logic for test systems
- Data transfer
- ESCC
- Asynchronous counter