MC74HC574ADW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 240 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74HC574ADW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tubeincludes it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 2V~6V volts, it operates. It is at -55°C~125°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74HC series. Its output frequency should not exceed 35MHz. A total of 1elements are contained within it. 20terminations have occurred. It is powered by a voltage of 3V . HC/UHis the family of this D flip flop. As soon as 6Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. A total of 2ports are embedded in the D flip flop.
MC74HC574ADW Features
Tube package
74HC series
MC74HC574ADW Applications
There are a lot of Rochester Electronics, LLC MC74HC574ADW Flip Flops applications.
- Digital electronics systems
- High Performance Logic for test systems
- Guaranteed simultaneous switching noise level
- ESCC
- 2 – Bit synchronous counter
- Supports Live Insertion
- Communications
- Memory
- Counters
- Safety Clamp