MC74HC4851ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.7kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4851A |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Power Dissipation | 450mW |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 240Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4851ADTR2G Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 16 series. A 1 circuit is present in this switch device. Search with MC74HC4851A if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 1.7kOhm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2V. This digital switch can be operated with a current of 20μA. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. Operating the 8 inputs requires 8 inputs.
MC74HC4851ADTR2G Features
8 Channels
20μA Supply Current
MC74HC4851ADTR2G Applications
There are a lot of ON Semiconductor MC74HC4851ADTR2G Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SONET
- Fault Tolerant Systems
- T1/E1 Terminals
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Fiber In The Loop (FITL)
- Channelized and Unchannelized DS3 applications
- Frame Relay Equipment
- Video switching
- Fiber to the Home