MC74HC4066AFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4066A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 20Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC4066AFELG Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -55°C~125°C TA. In total, there have been 14 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is injected into the electrical part body with 14 pins. Unlike digital switches, these are based on SPST - NO switching circuits. MC74HC4066A can be used to search for analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. To find out what the 14 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Analogue multiplexer with a Dual supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2V. An operating current of 40μA would be sufficient for this switch device. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 4 inputs. The data can be transferred over a wide range of bandwidths, called 160MHz bandwidths.
MC74HC4066AFELG Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74HC4066AFELG Applications
There are a lot of ON Semiconductor MC74HC4066AFELG Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Medical systems
- Video signal routing
- Communication systems
- Avionics
- MP3 players
- Multiplexers
- Imaging
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Intelligent PBX