MC74HC4051ADTR2
| Parameters | |
|---|---|
| Factory Lead Time | 48 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4051A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 80MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 18Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 76ns |
| Signal Current-Max | 0.025A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4051ADTR2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. Circuits number 1 make up this analogue multiplexer. Try searching for MC74HC4051A variants of the analog switch ic. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Digital switch that provides Dual, Single power at a cost-effective price. This digital switch can be operated with a current of 40μA. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical part can be operated at 6V voltage levels. This switch operates within the bandwidth of 80MHz.
MC74HC4051ADTR2 Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051ADTR2 Applications
There are a lot of ON Semiconductor MC74HC4051ADTR2 Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Digital Cross-Connects
- Medical
- High reliability control systems
- Sample hold systems
- Communications systems
- Intelligent PBX
- PDH Multiplexers
- Private Branch Exchange (PBX)
- High-Voltage