MC74HC175ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 35MHz |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC175ADR2G Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. Differentialis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. In this case, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. There should be no greater frequency than 35MHzon its output. There are 1 elements in it. T flip flop consumes 4μA quiescent energy. There have been 16 terminations. The 74HC175 family contains this object. An input voltage of 5Vpowers the D latch. A 10pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HC/UH. It is mounted by the way of Surface Mount. There are 16pins on it. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. There are 1bits in its design. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It runs on 2/6Vvolts of power. In order for the chip to function, it has 4output lines. It is of 4 channels.
MC74HC175ADR2G Features
Tape & Reel (TR) package
74HC series
16 pins
1 Bits
2/6V power supplies
MC74HC175ADR2G Applications
There are a lot of ON Semiconductor MC74HC175ADR2G Flip Flops applications.
- Reduced system switching noise
- Balanced Propagation Delays
- Pattern generators
- Circuit Design
- ESD performance
- Consumer
- Clock pulse
- EMI reduction circuitry
- Bounce elimination switch
- QML qualified product