MC74HC175ADR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 225 ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MC74HC175ADR2 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Differential. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. A temperature of -55°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. A frequency of 35MHzshould not be exceeded by its output. A total of 1elements are present in it. As a result, it consumes 4μA quiescent current and is not affected by external forces. 16terminations have occurred. Power is provided by a 5V supply. This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HC/UHfamily of D flip flop. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation.
MC74HC175ADR2 Features
Tape & Reel (TR) package
74HC series
MC74HC175ADR2 Applications
There are a lot of Rochester Electronics, LLC MC74HC175ADR2 Flip Flops applications.
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Computing
- Digital electronics systems
- Shift Registers
- EMI reduction circuitry
- Registers
- Convert a momentary switch to a toggle switch
- Supports Live Insertion