MC74HC175AD
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 35MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
MC74HC175AD Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. Package Tubeembeds it. It is configured with Differentialas an output. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. In this case, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74HC series. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. There have been 16 terminations. The 74HC175 family contains it. It is powered by a voltage of 3V . Its input capacitance is 10pF farads. HC/UHis the family of this D flip flop. Surface Mount mounts this electronic component. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. Flip flops designed with 4bits are used in this part. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Despite its superior flexibility, it relies on 4 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for RAIL. A power supply of 2/6Vis required to operate it.
MC74HC175AD Features
Tube package
74HC series
16 pins
4 Bits
2/6V power supplies
MC74HC175AD Applications
There are a lot of ON Semiconductor MC74HC175AD Flip Flops applications.
- Dynamic threshold performance
- Modulo – n – counter
- Power down protection
- Event Detectors
- Balanced Propagation Delays
- Data storage
- Communications
- QML qualified product
- Automotive
- Frequency division