MC74ACT573NG
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 1:8 |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 3.556mm |
| Length | 27.1526mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
MC74ACT573NG Overview
The package in which it is embedded is named 20-DIP (0.300, 7.62mm). As a result, it has a packaging of Tube. It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74ACT family. It is designed with 8 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74ACT573 family. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. It is a member of the ACT family of electronic devices. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Through Hole. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. The device is powered by 5V power supplies. There are 8 input lines in which electronic circuits are present. The device's reliable performance makes it a good choice for RAIL. Its output current of 24mA ensures maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. 3 output lines generate the binary equivalent of the input lines.
MC74ACT573NG Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
MC74ACT573NG Applications
There are a lot of ON Semiconductor MC74ACT573NG Latches applications.
- Frequency
- Digital bus buffer
- Control circuits
- Shift right register
- Parallel-to-Serial Data Conversion
- OC-48 communication systems
- Automatic test equipment
- Network Switches
- Automotive Cluster
- Frequency dividing