MC74ACT564DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT564 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT564DWR2 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74ACT series. It should not exceed 85MHzin terms of its output frequency. The list contains 1 elements. It consumes 8μA of quiescent Currently, there are 20 terminations. JK flip flop belongs to 74ACT564 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4.5pF farads. This D flip flop belongs to the family of ACT. Surface Mount mounts this electronic component. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It operates with 3 output lines.
MC74ACT564DWR2 Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT564DWR2 Applications
There are a lot of ON Semiconductor MC74ACT564DWR2 Flip Flops applications.
- Computers
- Individual Asynchronous Resets
- Modulo – n – counter
- Memory
- Storage Registers
- Convert a momentary switch to a toggle switch
- Power down protection
- Latch
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays