MC74ACT377DWG
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
MC74ACT377DWG Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. A frequency of 140MHzshould be the maximum output frequency. A total of 1 elements are present. This process consumes 8μA quiescents. Terminations are 20. The 74ACT377 family contains this object. It is powered by a voltage of 5V . A 4.5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the ACTfamily. Electronic part Surface Mountis mounted in the way. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. It is designed with a number of bits of 8. Its superior flexibility is attributed to its use of 8 circuits. It operates from 5V power supplies. A high level of efficiency can be achieved by maintaining the supply voltage at 5V.
MC74ACT377DWG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT377DWG Applications
There are a lot of ON Semiconductor MC74ACT377DWG Flip Flops applications.
- Data Synchronizers
- Storage registers
- Shift registers
- Bus hold
- 2 – Bit synchronous counter
- Set-reset capability
- Parallel data storage
- Asynchronous counter
- Digital electronics systems
- Computers