MC74ACT373MELG
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
MC74ACT373MELG Overview
There is an embedded version of it in package 20-SOIC (0.209, 5.30mm Width). This package has the format of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. It operates at -40°C~85°C TA degrees Celsius. It is a type of FPGA belonging to the 74ACT series. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74ACT373. A 5V voltage supply is required for operation. It is equipped with 20 pin count. ACT is the family of this electronic device. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line.
MC74ACT373MELG Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373MELG Applications
There are a lot of ON Semiconductor MC74ACT373MELG Latches applications.
- TV Set-top Boxes
- Parallel Input
- Multistage ripple counting
- Buffer register
- Parallel Input
- Synchronous frequency dividers
- Registers
- Counter
- Serial Output Data Queuing
- Buffer/Storage Registers