MC74ACT161MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 14.5 ns |
| Reset | Asynchronous |
| Family | ACT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 125MHz |
| Timing | Synchronous |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT161MELG Overview
The device is packaged in the 16-SOIC (0.209, 5.30mm Width)type. In order to configure it, it uses 16terminations. 5Vis fully flexible due to its voltage supply. The 1elements are connected by wires. There are a total of 16 pins in all components. Tape & Reel (TR)is used to package it. Circuit components are connected by 16pins. The device is mounted in the direction of [0]. In this case, it appears as a member of the family [0]. This device is a member of the 74ACTseries and is well suited for a wide range of applications. In this case, the logic type is set to [0]. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in a Surface Mountmanner. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 4bits of information contained in the device. Among its base part number [0], you will find additional parts that are related. The packing of this product is performed by [0]. In this case, there is 5V voltage coming from the voltage source. It is possible to provide a voltage up to 5.5V (Vsup). The 4input lines are used to input binary data as on/off signals.
MC74ACT161MELG Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
MC74ACT161MELG Applications
There are a lot of ON Semiconductor MC74ACT161MELG Counters & Dividers applications.
- Counter control/timers
- Time Out Timer for Consumer-Application Industrial Controls
- TRUE RMS-TO-DC CONVERSION
- Time delay circuits
- Time-delay circuits
- Divide-by-N counting
- Timers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Signal gating
- Fixed or Programmable Frequency Division