MC74ACT139D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT139D Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74ACT series multiplexers.Among its basic features are 16 terminations.To find signal switch's related components, a base part number of 74ACT139 may also be used.For multiplexer's system, 5V voltage is supplied.Currently, this turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of ACT.Normally, 5V is powered by a battery.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.In order to accept voltage levels, the multiplexers have input lines 1 on the board.A signal source has 4 output lines.
MC74ACT139D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
1 input lines
4 output lines
MC74ACT139D Applications
There are a lot of ON Semiconductor MC74ACT139D Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- RF-based home automation system
- Electronic circuits
- Telephone network
- Data distribution
- Automatic health monitoring systems
- Arithmetic Logic Units
- Seven segment displays
- Code conversion
- Logic gates for other digital devices