MC74AC74DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC74DTR2G Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Differential. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74ACseries comprises this type of FPGA. There should be no greater frequency than 160MHzon its output. There is a consumption of 4μAof quiescent energy. A total of 14terminations have been recorded. If you search by 74AC74, you will find similar parts. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4.5pFfarad input capacitance. This D flip flop belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. There are 14pins on it. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There is a 6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Using 2 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The power supply is 5V. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It operates with 1 output lines.
MC74AC74DTR2G Features
Tape & Reel (TR) package
74AC series
14 pins
5V power supplies
MC74AC74DTR2G Applications
There are a lot of ON Semiconductor MC74AC74DTR2G Flip Flops applications.
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch
- Buffer registers
- Data Synchronizers
- QML qualified product
- Divide a clock signal by 2 or 4
- Digital electronics systems
- CMOS Process
- Count Modes
- Asynchronous counter