Parameters |
Factory Lead Time |
44 Weeks |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
74AC |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
D-Type |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74AC74 |
Function |
Set(Preset) and Reset |
Output Type |
Differential |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
2 |
Load Capacitance |
50pF |
Output Current |
24mA |
Clock Frequency |
160MHz |
Propagation Delay |
16 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
6 ns |
Family |
AC |
Logic Function |
AND, D-Type, Flip-Flop |
Halogen Free |
Halogen Free |
Current - Output High, Low |
24mA 24mA |
Number of Bits per Element |
1 |
Max Propagation Delay @ V, Max CL |
10ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
4.5pF |
Number of Output Lines |
1 |
Clock Edge Trigger Type |
Positive Edge |
Max Frequency@Nom-Sup |
95000000Hz |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74AC74DG Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. You can find it in the Tubepackage. T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. A 2V~6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ACseries of FPGAs. It should not exceed 160MHzin terms of its output frequency. 14terminations have occurred. The 74AC74 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 4.5pF farads at the input. ACis the family of this D flip flop. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 14. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. As soon as 6Vis reached, Vsup reaches its maximum value. Normal operation requires a supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 2 circuits are used. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 24mA. It has 1 output lines to operate. Quiescent current is consumed by the D latch in the amount of 4μA.
MC74AC74DG Features
Tube package
74AC series
14 pins
MC74AC74DG Applications
There are a lot of ON Semiconductor MC74AC74DG Flip Flops applications.
- Single Up Count-Control Line
- Instrumentation
- Shift Registers
- Synchronous counter
- Divide a clock signal by 2 or 4
- QML qualified product
- Reduced system switching noise
- Data transfer
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch