MC74AC574DW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 95MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74AC574DW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould not be exceeded by its output. A total of 1elements are contained within it. Despite external influences, it consumes 8μAof quiescent current. 20terminations have occurred. Power is supplied from a voltage of 5V volts. Its input capacitance is 4.5pFfarads. In this case, the D flip flop belongs to the ACfamily. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
MC74AC574DW Features
Tube package
74AC series
MC74AC574DW Applications
There are a lot of Rochester Electronics, LLC MC74AC574DW Flip Flops applications.
- Balanced Propagation Delays
- Bus hold
- Computing
- Convert a momentary switch to a toggle switch
- Single Up Count-Control Line
- Modulo – n – counter
- Asynchronous counter
- Control circuits
- ESCC
- Registers