MC74AC161N
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 9.5 ns |
| Reset | Asynchronous |
| Family | AC |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Output Lines | 4 |
| fmax-Min | 95 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Count Rate | 167MHz |
| Timing | Synchronous |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
MC74AC161N Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. For its configuration, 16terminations are used. This device is fully flexible due to the supply voltage of [0]. The device contains 1terminations. The number of all component pins is 16. It is packaged in a manner consistent with Tube. Circuit components are connected with 16pins. It is mounted in the direction of [0]. In this case, it emerges as a member of the AC family. As a member of the 74ACseries, it is ideal for a wide range of applications. Logic type Binary Counter is adopted. It is recommended to set the operating temperature to -40°C~85°C. There is a mounting type of Through Holeon this device. Providing a supply voltage of 2V~6Vallows it to operate more reliably. In the device, the information consists of 4 bits. A major feature of this electronic device is its [0]. Further related parts may be found under the base part number 74AC161. In this case, 3.3/5Vvoltage is generated by the voltage source. As low as 2V Vsup is the minimum supply voltage. Typically, the supply voltage (Vsup) is limited to 6V. The device has a total of 4 output lines.
MC74AC161N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT
MC74AC161N Applications
There are a lot of ON Semiconductor MC74AC161N Counters & Dividers applications.
- Programmable decade counters
- Timers
- ANALOG SIGNAL PROCESSING
- Dual Up Counters
- Communications Digital Frequency Synthesizers;
- MULTIPLICATION
- Up Counters
- Decade counter/decimal decode display (CD4017B）
- Divide-by"N" counters/frequency synthesizers
- Digital multiplexing and demultiplexing