MC33298DW
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 9 V TO 26.5 V |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/16V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Number of Bits | 8 |
| Voltage - Output | 65V |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 15 μs |
| Output Peak Current Limit-Nom | 6A |
| Drain to Source Resistance | 350mOhm |
| Turn Off Time | 15 μs |
| Built-in Protections | THERMAL; OVER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 15.395mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33298DW Overview
As part of the SOIC package, it is included.A Bulk-shaped package holds it.There are 24 terminations in total.There is a DUAL terminal position on the device.24 pins make up the entire device.High efficiency can be achieved with a voltage supply of 5V.There is nothing else in Peripheral Drivers but this gadget.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 4.5V.5.5V (maximum supply voltage) is set.Part 59/16V uses a power supply that has a voltage.Consequently, 1A is the maximum output current that can be achieved to meet the operation criteria.Through the use of this device, ALSO REQUIRES A SUPPLY OF 9 V TO 26.5 V can also be produced.
MC33298DW Features
The terminal position of 24
MC33298DW Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33298DW hot swap controllers applications.
- Storage network
- Networking
- Redundant Array of Disks (RAID)
- Load transient protection
- DC boost circuit
- Central office switching systems
- Raid
- Limitting the inrush current
- Active current limit
- Current monitor output