MC14551BDG
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.05kOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14551B |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Nominal Supply Current | 15nA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Propagation Delay | 90 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Number of Gates | 4 |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14551BDG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component of this type can be found in the 16 series. A SPDT switching circuit is used for these analog switches. Try searching for the analog switch ic with MC14551B if you are looking for variants. A 1.05kOhm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. Dual supply type digital switch with a low cost. 3V should be the lowest voltage fed to the electronic component. 360nA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 8 inputs is required. It is possible to transfer data over a 17MHz-bandwidth.
MC14551BDG Features
2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz
MC14551BDG Applications
There are a lot of ON Semiconductor MC14551BDG Analog Switches & Multiplexers ICs applications.
- Imaging
- Private Branch Exchange (PBX)
- E1 Network Equipment
- Remote Powered Equipment
- High-Voltage
- DVD-R
- Voice over IP/DSL – Integrated Access Devices, Smart
- T1/E1 Terminals
- SDH
- Sample-and-hold systems