MC14175BD
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2009 |
| Series | 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4175 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 400 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
MC14175BD Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. T flip flop uses Differentialas the output. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. -55°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 4000Bseries of FPGAs. Its output frequency should not exceed 14MHz Hz. D latch consists of 1 elements. As a result, it consumes 20μA quiescent current. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 4175family includes it. A voltage of 5V provides power to the D latch. This JK flip flop has a 5pFfarad input capacitance. There is an electronic component mounted in the way of Surface Mount. The 16pins are designed into the board. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There are 4bits in this flip flop. Normally, the supply voltage (Vsup) should be kept above 3V. Its superior flexibility is attributed to its use of 4 circuits.
MC14175BD Features
Tube package
4000B series
16 pins
4 Bits
MC14175BD Applications
There are a lot of ON Semiconductor MC14175BD Flip Flops applications.
- Shift Registers
- Convert a momentary switch to a toggle switch
- Buffer registers
- Differential Individual
- Matched Rise and Fall
- ESCC
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Latch-up performance
- Asynchronous counter