MC14051BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14051B |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 15nA |
| Power Dissipation | 500mW |
| Throw Configuration | SP8T |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 700 ns |
| On-State Resistance (Max) | 280Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14051BDR2G Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. 1 circuits are used in this analogue multiplexer. MC14051B can be used to search for analog multiplexer variants. A 1.05kOhm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 18V to a switch device. A analog switch ic that has a cost-effective Dual supply type. It is recommended to use 3V as the lowest voltage for the electrical part. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. There are 8 inputs to be operated. It is possible to transfer data over a 17MHz-bandwidth.
MC14051BDR2G Features
8 Channels
Bandwidth: 17MHz
MC14051BDR2G Applications
There are a lot of ON Semiconductor MC14051BDR2G Analog Switches & Multiplexers ICs applications.
- Medical
- Imaging
- Wireless Local Loop
- Fault Tolerant Systems
- Fiber In The Loop (FITL)
- Relay replacements
- Central office
- Low-Voltage
- Video switching
- Signal routing between systems