MC14027BD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4027 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 13MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 2 |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14027BD Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A voltage of 3V~18Vis used as the supply voltage. It is at -55°C~125°C TAdegrees Celsius that the system is operating. There is JK Type type of electronic flip flop associated with this device. It belongs to the 4000Bseries of FPGAs. It should not exceed 13MHzin its output frequency. Despite external influences, it consumes 4μAof quiescent current. It has been determined that there have been 16 terminations. JK flip flop belongs to 4027 family. It is powered by a voltage of 5V . The input capacitance of this JK flip flopis 5pF farads. The electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. A normal operating voltage (Vsup) should remain above 3V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. 2input lines are available for you to choose from.
MC14027BD Features
Tube package
4000B series
16 pins
MC14027BD Applications
There are a lot of ON Semiconductor MC14027BD Flip Flops applications.
- Storage registers
- Load Control
- Matched Rise and Fall
- Dynamic threshold performance
- Guaranteed simultaneous switching noise level
- Parallel data storage
- Cold spare funcion
- Balanced 24 mA output drivers
- Bounce elimination switch
- Instrumentation