MC14016BDG
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 300Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14016B |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Power Supplies | 5/15V |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 45 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 54MHz |
| Turn-Off Delay Time | 90 ns |
| Number of Gates | 4 |
| -3db Bandwidth | 37MHz |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 3V~18V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14016BDG Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 14 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for the analog switch ic with MC14016B if you are looking for variants. A 300Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 14 pins are available. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 18V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. 3V should be the lowest voltage fed to the electronic component. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A 54MHz-bandwidth can be used for data transfer.
MC14016BDG Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 37MHz
Bandwidth: 54MHz
MC14016BDG Applications
There are a lot of ON Semiconductor MC14016BDG Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- E1 Network Equipment
- MP3 players
- Voice over IP/DSL – Integrated Access Devices, Smart
- CSU
- PBXs
- Imaging
- Cable Modem
- Residential Gateways, Home Gateway/Router
- Industrial control systems