MC10H136FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H136 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Max Supply Voltage | 5.46V |
| Min Supply Voltage | -4.94V |
| Number of Bits | 4 |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 5 ns |
| Family | 10H |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Count Rate | 250MHz |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H136FNR2 Overview
This device is supplied in the 20-LCC (J-Lead) package. There are 20 terminations used for its configuration. 1 elements are interconnected in wires. There are 20pins on all components. Packaging is based on Tape & Reel (TR). In the circuit, there are 20pins that connect other parts. Surface Mountis the way in which it is mounted. It emerges as a member of 10H family. Having been designed as a member of the 10Hseries, it is well suited to a variety of applications. It is decided to use the logic type [0]. 0°C~75°Cis the recommended operating temperature. In this case, it is mounted with a Surface Mounttype. There is information in the device in the form of 4bits. Under its base part number of [0], you will find additional related parts. It is packed with [0]. 5.46Vis the maximum voltage the device can handle. The minimum voltage available for the device is as low as -4.94V. A total of 4input lines are used to input binary data in the form of on/off signals.
MC10H136FNR2 Features
Embedded in the 20-LCC (J-Lead) package
MC10H136FNR2 Applications
There are a lot of ON Semiconductor MC10H136FNR2 Counters & Dividers applications.
- Signal gating
- Programmable decade counters
- Control counters
- Fixed and programmable counters greater than 10
- SQUARE ROOT
- counting/frequency sy nthesizers-BCD output
- Up Counters
- TRUE RMS-TO-DC CONVERSION
- Frequency dividing circuits
- Binary counter/decoder