MC10EP35DTR2G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 2 |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 50mA |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 0.49 ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MC10EP35DTR2G Overview
The package is in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. It operates with a supply voltage of -3V~-5.5V. It is operating at -40°C~85°C TA. This D latch has the type JK Type. JK flip flop is a part of the 10EPseries of FPGAs. A frequency of 3GHzshould not be exceeded by its output. In total, it contains 1 elements. There is a consumption of 50mAof quiescent energy. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. An input voltage of 3.3Vpowers the D latch. Devices in the 10Efamily are electronic devices. There are 2bits in this flip flop. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 3V. In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis a characteristic of it.
MC10EP35DTR2G Features
Tape & Reel (TR) package
10EP series
2 Bits
MC10EP35DTR2G Applications
There are a lot of Rochester Electronics, LLC MC10EP35DTR2G Flip Flops applications.
- QML qualified product
- Power down protection
- Frequency Dividers
- Set-reset capability
- Instrumentation
- Latch
- High Performance Logic for test systems
- Frequency Divider circuits
- Dynamic threshold performance
- Parallel data storage