MC10EP33DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Family | 10E |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP33DR2G Overview
In the 8-SOIC (0.154, 3.90mm Width)package, it is supplied. Using 8terminations, it can be configured. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. A total of 8pins are available on all components. It is packaged in a manner consistent with Tape & Reel (TR). A circuit is connected to other components by 8pins. To mount it, use the method of [0]. It emerges as a member of 10E family. As a member of 10EP series, it is well suited for various applications. The logic type of Divide-by-4 is adopted. -40°C~85°Cis the recommended operating temperature. Having a mounting type of [0], it is suitable for installation. As a result, the device operates more reliably when a supply voltage of 3V~5.5Vis applied. As far as Pbfree code is concerned, the result may be yes. Among the features of this electronic device, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare essential. The base part number of 10EP33provides access to more related parts. As a result of the voltage source, there is -5.2V voltage. Supply voltage (Vsup) can be as low as 3V. It is possible to provide a voltage up to 5.5V (Vsup). It is an electronic component of the Prescaler/Multivibrators family. Data and clock inputs are configured at [0].
MC10EP33DR2G Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP33DR2G Applications
There are a lot of ON Semiconductor MC10EP33DR2G Counters & Dividers applications.
- Up Counters
- Frequency division
- Programmable decade counters
- DIVISION
- Analog multiplexing and demultiplexing
- Clocks
- Signal gating
- Digital multiplexing and demultiplexing
- Binary counter/decoder
- Timing applications