MC10EP131MNG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-XQCC-N32 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 120mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MC10EP131MNG Overview
It is packaged in the way of 32-VFQFN Exposed Pad. A package named Tubeincludes it. In the configuration, Differentialis used as the output. In the configuration of the trigger, Positive, Negativeis used. Surface Mountis in the way of this electric part. A supply voltage of -3V~-5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 10EP series. Its output frequency should not exceed 3GHz. In total, it contains 1 elements. There is 120mA quiescent consumption. A total of 32 terminations have been made. It is powered from a supply voltage of 3.3V. The electronic device belongs to the 10Efamily. Vsup reaches its maximum value at 5.5V. Normal operation requires a supply voltage (Vsup) above 3V. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V on the electronic flip flop that can be referred to.
MC10EP131MNG Features
Tube package
10EP series
MC10EP131MNG Applications
There are a lot of Rochester Electronics, LLC MC10EP131MNG Flip Flops applications.
- Count Modes
- Modulo – n – counter
- ESD performance
- Latch-up performance
- Buffered Clock
- Shift Registers
- Computing
- Digital electronics systems
- Computers
- Storage Registers