MC10E451FNG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PQCC-J28 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Clock Frequency | 1.1GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 101mA |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
MC10E451FNG Overview
As a result, it is packaged as 28-LCC (J-Lead). The package Tubecontains it. This output is configured with Non-Inverted. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 10Eseries of FPGAs. In order for it to function properly, its output frequency should not exceed 1.1GHz. The element count is 1 . There is 101mA quiescent consumption. The number of terminations is 28. A voltage of 5V provides power to the D latch. In terms of electronic devices, this device belongs to the 10Efamily of devices. The maximal supply voltage (Vsup) reaches 5.7V. Normal operation requires a supply voltage (Vsup) above 4.2V. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC10E451FNG Features
Tube package
10E series
MC10E451FNG Applications
There are a lot of Rochester Electronics, LLC MC10E451FNG Flip Flops applications.
- Event Detectors
- 2 – Bit synchronous counter
- Computers
- CMOS Process
- Communications
- Storage Registers
- Pattern generators
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- Patented noise