MC10E1652FN
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 18 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | MOSAIC III™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC10E1652 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Differential, ECL |
| Number of Circuits | 2 |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 50mA |
| Output Current | 100mA |
| Max Supply Current | 50mA |
| Number of Bits | 1 |
| Quiescent Current | 50mA |
| Response Time | 475 ps |
| Family | 10E |
| Output Current per Channel | 50mA |
| Output Polarity | COMPLEMENTARY |
| Propagation Delay (tpd) | 1.075 ns |
| Hysteresis | 27mV |
| Current - Output (Typ) | 100mA |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E1652FN Overview
The product is packaged in 20-LCC (J-Lead) to facilitate transportation.This comparator is of the Differential, ECL output type.The part is shipped by Tube .The device is designed with 20 terminations.With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical with Latch comparator.Electronic comparator has 20 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~85°C .The comparator consists of 20 pins.You can search MC10E1652 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 50mA .The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 50mA for normal use.If the current supply exceeds 50mA , the comparator might be damaged.A voltage of 5V is the minimum supply voltage allowed by this comparator.The part belongs to the series of comparator MOSAIC III? .
MC10E1652FN Features
Differential, ECL output capability
with Latch IC
Operates under 0°C~85°C
Quiescent Current: 50mA
MC10E1652FN Applications
There are a lot of ON Semiconductor MC10E1652FN linear comparators applications.
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Wearable Devices
- Lithium ion battery monitoring
- Laptop Computers
- Point of load regulators
- Automatic Test Equipment
- Window Comparators
- Handheld Instruments