MC10E016FNG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 900MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E016 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 8 |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Max Input Voltage | 4.19V |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10E016FNG Overview
It is a device supplied in the 28-LCC (J-Lead) package. 28 terminations are used for its configuration. Having a supply voltage of 5V enables to operate in a fully flexible manner. A wire connects the 1elements. A total of 28pins are present on all components. In this case, it is packaged as Tube. Circuit components are connected by 28pins. Using [0], it can be mounted. In this case, it appears as a member of the 10E family. The 10Eseries is well suited to a number of uses. The logic type of Binary Counter is adopted. The operating temperature should be set at 0°C~85°C. This device is mounted in the Surface Mountposition. As a result, the device operates more reliably when a supply voltage of 4.2V~5.7Vis applied. The device contains information consisting of 8bits. Using the Pbfree code, the result may be yes. A major feature of this electronic device is its [0]. More related parts are available under its base part number 10E016. Voltage from the voltage source is [0]. To operate, it requires a supply voltage of [0]. There is a minimum supply voltage (Vsup) of 4.2V volts. Frequency 900MHzdetermines its operation. Up to 5.7Vis the maximum supply voltage (Vsup). 8input lines are used to input binary data as on/off signals.
MC10E016FNG Features
Embedded in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5V
Frequency of 900MHz
MC10E016FNG Applications
There are a lot of ON Semiconductor MC10E016FNG Counters & Dividers applications.
- Divide-by-N counting
- Fixed and programmable counters greater than 10
- LINEARIZATION
- TRUE RMS-TO-DC CONVERSION
- Counter control/timers
- Dual Up Counters
- Control counters
- Frequency dividing circuits
- VHF, UHF, FM, AM, etc.
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters