MC100LVEL34DTG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100LVEL |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Voltage - Supply | 3V~3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC100LVEL34 |
| Output | ECL |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.8V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 52mA |
| Max Supply Current | 62mA |
| Frequency (Max) | 1.5GHz |
| Logic Function | Clock |
| Halogen Free | Halogen Free |
| Input | LVDS, NECL, PECL |
| Ratio - Input:Output | 1:4 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Max Duty Cycle | 50 % |
| Divider/Multiplier | Yes/No |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEL34DTG Overview
Clock generator is packaged in the way of Tube. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 16 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3.3V. There is a Clock PLL called LVDS, NECL, PECL which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. There is a maximum frequency of 1.5GHz Max with this clock-based frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 3.8V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 3V~3.8V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. A frequency synthesizer which is compatible with the ECL logic levels is presented here. This is an electronic part that can be classified as a Clock Generator in this case. It is a 16-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number MC100LVEL34 can be found below. Clock generator is designed with 16 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. There are a number of electronic parts in the 100LVEL series, including this one. Clock PLL is facilitated with 4 signal outputs to magnify output frequency as high as possible. For its full function, a supply current of 52mA is required. In this RF synthesizer operation, 62mA of current are supplied. Input data is processed by combining clock logic function Clock.
MC100LVEL34DTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
MC100LVEL34DTG Applications
There are a lot of ON Semiconductor MC100LVEL34DTG Clock Generators applications.
- Bit synchronization
- Precision auxiliary angle deflection measurement
- Microwave backhaul IF
- Motor speed controls
- Test and instrumentation equipment
- Integrated phase noise in aerospace systems
- High-speed communication applications
- Electronic countermeasures
- Aerospace and defense
- GPS systems