MC100ES6030EG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Reach Compliance Code | unknown |
| Frequency | 1.2GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.8V |
| Min Supply Voltage | 3.135V |
| Number of Bits | 3 |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 600 ps |
| Logic Function | AND, D-Type |
| Logic IC Type | D FLIP-FLOP |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
MC100ES6030EG Overview
As a result, it is packaged as SOIC. D latch consists of 1 elements. 20terminations have occurred. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 3 Bits. A reliable performance of this D flip flop makes it well suited for use in TUBE. A temperature below 85°Cis recommended for operation. A temperature above -40°Cshould be used for the operation. Normally, it operates with a voltage of 3.135VV as its minimum supply voltage. In this case, it supports a maximum supply voltage of 3.8V. A frequency of 1.2GHzcan be achieved. The logic IC it adopts is D FLIP-FLOP. It is equipped with 3 Functions . With 20 pins, it is equipped with a low power consumption.
MC100ES6030EG Features
20 pins
3 Bits
3 Functions
20 pin count
MC100ES6030EG Applications
There are a lot of Integrated Device Technology (IDT) MC100ES6030EG Flip Flops applications.
- Communications
- Set-reset capability
- CMOS Process
- Consumer
- Shift registers
- Instrumentation
- ESCC
- Convert a momentary switch to a toggle switch
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29