MC100EP52DTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 100EP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | -3V~-5.5V |
| Function | Standard |
| Output Type | Differential |
| Number of Elements | 1 |
| Clock Frequency | 3GHz |
| Current - Quiescent (Iq) | 45mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| RoHS Status | Non-RoHS Compliant |
MC100EP52DTR2 Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). D flip flop is included in the Tape & Reel (TR)package. Differentialis the output configured for it. The trigger configured with it uses Positive, Negative. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of -3V~-5.5V. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 100EPseries FPGA. Its output frequency should not exceed 3GHz. A total of 1elements are present in it. Despite external influences, it consumes 45mAof quiescent current.
MC100EP52DTR2 Features
Tape & Reel (TR) package
100EP series
MC100EP52DTR2 Applications
There are a lot of Rochester Electronics, LLC MC100EP52DTR2 Flip Flops applications.
- Balanced Propagation Delays
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- CMOS Process
- Control circuits
- Bounce elimination switch
- Event Detectors
- Pattern generators
- Guaranteed simultaneous switching noise level