MC100EP32MNR4G
| Parameters | |
|---|---|
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP32 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 480 ps |
| Turn On Delay Time | 480 ps |
| Reset | Asynchronous |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 40mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
MC100EP32MNR4G Overview
This device is supplied in the 8-VFDFN Exposed Pad package. 8 terminations are used for its configuration. This device is fully flexible due to the supply voltage of [0]. All component pins are equal to 8. Packaging is based on Tape & Reel (TR). As part of the circuit, there are 8pins that connect other components. The Surface Mountway is used to mount it. The 100EPseries offers a wide range of applications due to its versatility. The logic type of Divide-by-2 is adopted. Setting the operating temperature to -40°C~85°C is recommended. In this case, it is mounted with a Surface Mounttype. Providing a supply voltage of 3V~5.5Vallows it to operate more reliably. Based on the Pbfree code, the result may be yes. It is important to note that NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare really important features of this electronic device. Under its base part number of [0], you will find additional related parts. From the voltage source, there is a voltage of -4.5V volts. The minimum supply voltage (Vsup) is as low as 3V. It is possible to supply voltages up to 5.5V volts (Vsup). The electronic part belongs to the Prescaler/Multivibrators family. There are 1 data/clock inputs configured on this device. According to the system, there have been 1outputs sent.
MC100EP32MNR4G Features
Embedded in the 8-VFDFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC100EP32MNR4G Applications
There are a lot of ON Semiconductor MC100EP32MNR4G Counters & Dividers applications.
- DIVISION
- Signal gating
- Frequency dividing circuits
- ALGEBRAIC COMPUTATION
- Frequency dividers
- Fixed and programmable counters greater than 10
- Fixed or Programmable Frequency Division
- Timing applications
- Frequency division
- Time Out Timer for Consumer-Application Industrial Controls